technical:24.04_ups_setup_with_nut
This is an old revision of the document!
APC UPS Devices
Install the required packages:
apt install apcupsd apcupsd-cgi
nano /etc/apcupsd/apcupsd.conf:
<pre> UPSCABLE usb UPSTYPE usb #DEVICE /dev/ttyS0 POLLTIME 60 BATTERYLEVEL 10 MINUTES 3 Restart the UPS monitoring service: </pre>
systemctl restart apcupsd.service
Check /var/log/syslog for errors and check communication with:
apcaccess
technical/24.04_ups_setup_with_nut.1767651682.txt.gz · Last modified: by mark_scottworld.net